Solar GPS Tracker Case - Magnetic Mount for Portable GPS Trackers

• SOLAR CHARGING FOR YOUR GPS TRACKER: The solar panel on the lid charges your GPS tracker’s own built-in battery in daylight through the integrated mini USB cable. Keep your tracker running for up to 6 months between manual charges; runtime depends on sunlight, season and tracker update settings.
• NO BATTERY INSIDE, JUST PLUG AND GO: The case works as a solar charging adapter and contains no battery of its own. Fully charge your tracker first, connect it to the built-in mini USB cable, latch the lid, and the solar panel takes over.
• STRONG 6-MAGNET MOUNT, NO TOOLS: Six neodymium magnets lock the case onto steel surfaces such as vehicle frames, trailer tongues, roof racks and equipment housings in seconds. No drilling, wiring or adhesive needed, and you can move it between vehicles anytime.
• WEATHERPROOF HARD-SHELL PROTECTION: Rugged ABS housing with foam padding and two secure latches helps protect your tracker from rain, dust, road dirt and temperature changes during long-term outdoor use on cars, trucks, trailers, boats, RVs and ATVs.
• USB ADAPTER INCLUDED FOR BACKUP CHARGING: In winter, long cloudy periods or garage parking, charge your tracker directly with the included USB adapter. Place the case with the solar panel facing open sky for best results, and avoid shaded spots under the frame or inside wheel wells.

Add a solar adapter to your compatible GPS tracker setup with this custom-built magnetic case from Spy Spot. A custom-made solar panel is bonded to the top, with its wire routed through the case to the adapter inside. This is a solar adapter housed in a magnetic case, not a battery pack or a standalone GPS tracker.

Why Choose This Solar Adapter Case

• Custom-assembled by Spy Spot: Combines a magnetic case, top-mounted solar panel and internally routed wiring in one assembly.
• Magnetic mounting: Attaches to a suitable ferromagnetic metal surface without drilling into the mounting surface.
• Integrated solar panel: The panel is glued to the top of the case, keeping the solar adapter setup together.
• No built-in battery: Designed as an adapter rather than an energy-storage unit. Any battery capacity comes from your connected device or a separate compatible battery.
• Defined case dimensions: Measures 6.5 × 4.2 × 1.9 inches. Confirm usable interior space and device fit before ordering.

Ideal For

• Compatible portable GPS tracker setups
• Installations with a suitable magnetic mounting surface
• Locations where the top-mounted panel can receive sunlight

Important: No battery is included. GPS tracker sold separately. Solar output depends on sunlight and placement; this adapter does not guarantee continuous charging or a specific tracker runtime. Position the panel where it receives sunlight, not beneath a vehicle or inside a shaded enclosure. Confirm your tracker’s dimensions, connector and power requirements with Spy Spot before purchase. Physical fit alone does not establish electrical compatibility.

SKU: SSMMC-1. Custom-assembled by Spy Spot.

Technical Specifications

• Product type: Solar adapter housed in a magnetic GPS tracker case
• Assembly: Custom-assembled by Spy Spot
• Solar panel: Custom-made panel glued to the top of the case
• Wiring: Solar-panel wire routed through the case to the adapter inside
• Mounting: Magnetic attachment to suitable ferromagnetic metal surfaces
• Built-in battery: None; the case does not store energy
• Case dimensions: 6.5 × 4.2 × 1.9 inches
• GPS tracker: Sold separately
• Compatibility: Confirm tracker fit, connector and power requirements with Spy Spot before ordering
• SKU: SSMMC-1

Solar output depends on sunlight and panel placement. This accessory does not guarantee continuous charging or a specific tracker runtime.

What's Included

A magnetic case custom-assembled by Spy Spot, with a solar panel glued to the top and its wire routed through the case to the adapter inside. There is no battery in the case. GPS tracker sold separately.

Installation & Setup

1. Check compatibility: Confirm your tracker's fit, connector, and power requirements with Spy Spot before connecting it. Physical fit alone does not confirm electrical compatibility.
2. Prepare your tracker: Charge and set up your GPS tracker according to its own instructions. This case has no internal battery to charge and does not replace your tracker's setup or activation.
3. Connect the adapter: Open the case and carefully connect the adapter lead to your confirmed-compatible tracker. Do not force the connector, pull on the solar-panel wire, or loosen the bonded panel.
4. Close the case: Position the tracker and wiring so nothing is pinched or strained, then close the case securely.
5. Choose a mounting location: Clean and dry a suitable ferromagnetic metal surface. Position the case with the solar panel exposed to direct sunlight, not beneath a vehicle or inside a shaded enclosure. Keep it away from heat sources and moving parts.
6. Check the installation: Confirm the magnetic base holds securely and the wiring remains protected. Check tracker operation and any charging indication using the tracker's own instructions before relying on the setup.

Tips & Notes

• This is a solar adapter in a case, not a battery pack or standalone GPS tracker. It does not store energy for use after dark.
• Solar output depends on sunlight, shade, season, and placement. Continuous charging and a specific tracker runtime are not guaranteed. Monitor your tracker's battery and recharge it as needed according to its instructions.
• Do not assume the modified case or wire entry is waterproof. Confirm outdoor exposure limits with Spy Spot before installation; avoid submersion and high-pressure water.
• Keep the solar panel clean and unobstructed. Inspect the magnetic hold, panel bond, and wiring regularly. Lift and handle the assembly by the case, not by the panel or wire.