XT60 USB Charging Adapter for E-Bike & Scooter, Dual Port

• VERSATILE XT60 COMPATIBILITY: Designed for e-bikes and scooters using XT60 battery connectors, supporting a wide 12V-108V DC input range compatible with many common battery systems.
• DUAL USB CHARGING PORTS: USB-A and USB-C ports allow charging of two devices simultaneously with shared 5V/2.4A output, suitable for phones, GPS trackers, and action cameras during rides.
• SIMPLE PLUG-AND-PLAY INSTALLATION: Pre-wired XT60 connector and integrated mounting points support secure installation without soldering, making setup straightforward for riders and commuters.
• RELIABLE POWER ON THE GO: Provides consistent standard USB charging to help maintain device battery levels during commuting, delivery routes, or recreational riding.
• DURABLE DESIGN FOR DAILY RIDING: Compact, vibration-resistant housing designed for regular outdoor use; install in a protected location to reduce exposure to heavy rain or harsh conditions.

Turn your e-bike or electric scooter into a convenient mobile charging solution with this XT60 USB charging adapter designed for reliable on-the-go power. Supporting a wide input voltage range from 12V to 108V DC, this compact device converts battery power into stable 5V/2.4A USB output suitable for many common electronic devices.

Built for riders who rely on navigation, communication, and recording devices during travel, this adapter allows continuous charging while commuting, exploring trails, or completing delivery routes. The dual USB-A and USB-C ports support simultaneous device connection, helping maintain battery levels for smartphones, GPS trackers, and action cameras.

The pre-wired XT60 connector simplifies installation by allowing direct connection to compatible battery systems. Integrated mounting points support secure placement on your vehicle frame, while the compact housing helps withstand vibration from regular riding conditions.

Built-in voltage regulation helps maintain stable output across various battery voltage levels, supporting dependable charging performance for compatible USB-powered devices.

Whether you're commuting daily, riding recreationally, or using navigation and tracking equipment, this XT60 charging adapter provides a practical way to keep essential devices powered while you ride.

• Is this adapter compatible with 36V and 48V e-bike batteries?

Yes, it supports input voltages from 12V to 108V and works with many common e-bike and scooter battery systems that use XT60 connectors.

• Can I charge two devices at the same time?

Yes, the USB-A and USB-C ports allow simultaneous charging, with total output shared at 5V/2.4A.

• Is installation difficult?

Installation is simple using the pre-wired XT60 connector and mounting points for secure attachment.

• Is this adapter waterproof?

The housing is designed for outdoor riding conditions; install in a protected location to reduce exposure to heavy rain.

• Will this drain my e-bike battery quickly?

The adapter uses efficient power conversion to support device charging during rides.

• Does this support fast charging?

This adapter provides standard USB charging output and is not designed for high-speed or USB Power Delivery charging.

Power & Electrical Specifications

• Input Connector: Pre-wired XT60 male connector.
• Input Voltage Range: 12V to 108V DC (fully compatible with 36V, 48V, 52V, and higher voltage systems).
• Output Ports: Dual ports featuring 1 x USB-A and 1 x USB-C.
• Output Voltage: Regulated 5V DC.
• Maximum Output Current: 2.4A total shared output between both ports.
• Fast Charging Support: No (supports standard 5V USB charging; does not support USB Power Delivery or Qualcomm Quick Charge protocols).
• Power Conversion: Built-in DC-to-DC step-down voltage regulation.

Physical & Environmental Features

• Installation Type: Tool-free plug-and-play setup with integrated mounting points/holes for frame attachment.
• Housing: Compact, vibration-resistant shell engineered for daily outdoor riding.
• Weather Protection: Features a protective rubber USB port cover to resist dust and moisture.
• Use Cases: Powering smartphones, GPS units, action cameras, and portable trackers like the Spy Spot GL320 Micro Tracker directly from a vehicle's primary battery pack.

Installation & Setup Guide

Get your dual-port USB charging adapter up and running in just a few minutes. Designed for a seamless, plug-and-play experience on most e-bikes and electric scooters.

Step 1: Locate Your Battery Line

Turn off your e-bike or scooter completely before beginning. Locate the main battery power line connecting your battery pack to the vehicle's internal motor controller, and look for the yellow, inline XT60 connectors.

Step 2: Connect the Adapter

1. Disconnect the existing inline XT60 connection on your vehicle.
2. Plug the adapter’s pre-wired male XT60 connector securely into the matching female XT60 connector coming from your main battery line.
3. Reconnect the remaining links to complete the power circuit, allowing the adapter to safely draw power from the main system loop.

Step 3: Secure and Mount

Using the integrated mounting holes on the adapter's vibration-resistant housing, secure the unit firmly to your vehicle's frame, handlebar stems, or under-seat area. We recommend using heavy-duty nylon zip ties or small mounting screws (not included) to prevent movement while riding.

Step 4: Plug In & Power Up

1. Peel back the flexible protective rubber cap to expose the dual USB ports.
2. Connect your standard USB-A or USB-C charging cables directly into the adapter ports to power your smartphone, GPS unit, action camera, or portable tracker.
3. Crucial Step: When not in active use, or when riding in damp conditions, ensure the rubber weather cap is firmly pressed completely back into place over the ports to resist dust and moisture.

Quick Technical Checklist

• Input Compatibility: 12V to 108V DC (Fully compatible with standard 36V, 48V, and 52V setups)
• Output Rating: 5V / 2.4A shared standard charging current across both ports
• Weather Resistance: Splash-resistant housing when the protective cap is fully sealed